10 Things You Learned In Preschool, That'll Aid You In Ghost Immobiliser Install
Why Should ghost installation Have a Ghost Immobiliser Installed?
Autowatch Ghost is an innovative car immobiliser of the future that protects your vehicle from theft. It operates in a discreet manner by connecting to the vehicle's CAN data network and it requires a unique changeable PIN code sequence to be entered for the vehicle to begin.
The system is quiet and does not come with LED indicators and is unreadable with diagnostic tools. It is also TASSA-approved and recognised by certain insurance companies.
ghost immobiliser installation or LED indicators
Ghost immobilisers, a revolutionary advancement in security for cars is able to stop thieves from driving even if they enter your vehicle. It connects to the onboard CAN data circuit of your vehicle and communicates silently so that there aren't any key fobs or radio signals required, making it difficult for thieves to evade it. It is also inaccessible to diagnostics, and does not include an LED indicator that would reveal its location. This makes it an ideal option for vehicles that are costly or rare, such as antique cars.
Autowatch Ghost is an extremely small device that can be concealed within the vehicle's loom. This makes it virtually impossible for thieves or other intruders to detect it. The device is connected to the ECU to prevent theft. It connects to the CAN (Controller Area Network) system. It is extremely simple to install and can be put in place within less than an hour. It is also a lot less intrusive than other anti-theft devices, such as steering wheel locks.
The device is based on the same technology used by GPS trackers, however it stops theft by stopping the vehicle from getting started. It uses buttons on your car to generate a unique, changeable PIN code that must be entered in order to allow you to drive your car. The device can be programmed to utilize obscure buttons, such as the ones on the back of the rear demister, to make it harder for thieves to guess the PIN. This kind of technology is becoming more popular, and many insurance companies are now requiring it on cars equipped with a keyless entry system.
The Ghost also stops key cloning and hacking. The device is connected to your vehicle's CAN bus, and it uses the buttons to generate an individual code that is able to be changed. The code has to be entered to start the car. It cannot be defeated by simply putting in new key fobs or changing the ECU. Instead, the criminal must employ a specific tool to get around the immobiliser.
The ghost immobiliser is bought at a bargain cost and is paired with GPS tracking to ensure the security of your vehicle. It's a great option for older vehicles, and can save you money on insurance premiums. If you're thinking about a ghost immobiliser, contact us at Trackershop for a quote. We'll include the installation in the price so that you can feel confident about the security of your vehicle.
It is TASSA approved
Immobilisers are the most effective way to secure your car. It stops a vehicle from starting unless the correct PIN code is entered and can also disable other functions like the fuel pump or starter motor. It is essential to install an immobiliser by a professional. The installer should be TASSA certified, which assures that the product is safe and works correctly. The process involves examining the installer's credentials, including criminal background checks and an identity check.
The Ghost immobiliser is the latest solution to stop thieves from stealing your vehicle. It is directly connected to the CAN data network of your vehicle and does not require additional fobs or alarm systems. The system is quiet and cannot be detected either by car trackers or thief. The system makes use of buttons on the steering wheel or door panels, as well as the centre console to create a unique PIN code. The correct sequence needs to be entered to start your car, making it extremely difficult for thieves to crack.
This innovative immobiliser is approved by TASSA and can be installed at Trackershop. They are experts in installing this device. It also provides other security products, such as a remote starter and a device to track theft. The company's team of technicians is fully mobile and can install the device at home or work.
With more & more vehicles being stolen with no owner's keys, it's important to ensure your car is secure. Keyless cars of today are especially vulnerable to theft, since cloning equipment & door lock pick sets are readily available on the internet. An Autowatch Ghost can assist to prevent this, as it isn't able to be detected by thieves or picked up by the vehicle tracker.
The Ghost II CAN is completely protected and isn't able to be altered by thieves. It can detect attempts to tamper the ECU and will close certain parts of the engine in an attempt to stop it. It also can deactivate the alarm system to avoid getting attention from the wrong people and allow thieves to get away.
Reversible
The Ghost immobiliser can be fitted or removed at any time. It is linked directly to your vehicle's CAN (Controller Area Network) and protects you with a personalized PIN code that is a private sequence that only you be able to identify. Once the PIN has been entered correctly, it will stop the car from starting and stop thieves from trying to steal your vehicle.
The installation of the Ghost is non-invasive and your warranty will not be affected. The system is also compatible with any other aftermarket alarm or tracker you may have installed. It will also not leave a trace on your vehicle's interior or exterior. It's not noticeable to thieves because it does NOT use keys or LED indicators.
Organised car thief gangs are now employing devices to read circuit wires on vehicles, however the Ghost Immobiliser does not use any of these methods. Instead, it utilizes buttons located on the dashboard or steering wheel to let you set a unique PIN code sequence. This code must be entered to start the vehicle.
The Ghost Immobiliser can also safeguard your vehicle from OBD port hacking. This kind of theft has become increasingly frequent, and is one of the most difficult methods to stop. The Ghost Immobiliser can help prevent these crimes by preventing the criminal from connecting a laptop to your vehicle's OBD port and cloning your keys.
The Ghost can be used in conjunction with a vehicle tracker. This can be very helpful in locating your car after it's been stolen. However, it isn't recommended that you make use of a tracker as your primary security measure against theft since they don't stop theft in by itself. They are also easier to detect and remove than the Ghost immobiliser.
Easy to install
A Ghost immobiliser, a groundbreaking technology that is a first, it can help you safeguard your vehicle from theft. It connects to your vehicle's CAN (Controller Area Network) system and creating a unique code sequence that is difficult for thieves to crack. It is a low-cost and highly effective way to ensure your car is safe from theft.
Ghost is designed to be compatible with all vehicles including those with aftermarket key fobs. The device makes use of the buttons on your dashboard, steering wheel and central console to create a unique PIN code sequence that stops thieves from opening your vehicle. It also has other features, including a GPS tracker to locate your vehicle.
Many drivers pick this type of device because it offers protection against various types of vehicle theft. It is easy to install, silent and doesn't rely on radio signals. It is also a good option for those who don't want to buy a complete alarm system. It is important that an expert installs the device to ensure it works properly.
If you're thinking about a ghost immobiliser, you must have it professionally installed to ensure that it's operating exactly as it should. A professional will know where to place it and will make sure that the unit is properly connected to your vehicle's electronic system. The installer will make sure the device is kept hidden and cannot be seen by anyone without any reason.
The Autowatch Ghost II CAN Immobiliser can be set to Valet/Service mode which allows your car to be driven at 30mph without having to use the access key. This makes it perfect for valet parking or transporting your car. It is also a great option in this manner when your vehicle is being serviced by a dealer. This mode can be disabled by the companion app and then reset at the end of each use.
The Ghost is the first aftermarket CAN bus immobiliser that does not require any wire cutting. It connects directly to the CAN system onboard of your vehicle. It's not detectable with tools for diagnosis or cloning. It's tamper-proof, works silently and does not emit any radio signals. It is reversible, so you can shift it to a different vehicle when required.